In India, water spotting is one of the most annoying to the detailing enthusiasts. Some of the watermarks as time goes, etches into the car paint and becomes very difficult to remove. It’s very difficult to remove water marks from a coated paint surface without affecting the coating.
GYEON Q2M WATERSPOT is the ideal product for this task, as it contains lubricating oils in addition to a mild acid, which means that it helps to limit the risk of inflicting fresh marring when tackling water spotting without affecting the coating.
EASY TO USE
Q2M Waterspot is very easy to use. Before applying, clean the bodywork with a HQ, gentle, pH-neutral shampoo and dry the surface. Than spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots. If having strong staining, spray generously directly onto the surface, leave for a couple of minutes and then wipe such surface few times with a MF.
Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, so the cleaned area can be wiped multiple times.
BODYWORK & COATING SAFE
The biggest advantage of Q2M WaterSpot is its complete safety for paint and most of all – coatings. Due to inappropriate maintenance, water spots may become an issue on fresh coatings, but owning to product properties, Q2M WaterSpot does not affect or damage the coating. You can therefore remove the most undesirable defects by using O2M WaterSpot without needing to polish and re-apply the quartz coat.
ADVICE ON APPLICATION
Wash the entire bodywork with a HQ car shampoo, rinse well and dry. Spray onto the affected surface and wipe off with a soft MF after at least 30 seconds.
Note: This product might not be able to remove stubborn water-spots, hence for a professional use, please try GreenZ MDR
BODYWORK SAFE: yes
COATING SAFE: yes, but it depends on coating and the time after coating
PH NEUTRAL: no