Nanolex Si3D Ceramic Coating

Brand: Nanolex
5.00 out of 5 based on 1 customer rating
(1 customer review )

 5,141

Nanolex Si3D will add a several micron thick clear coat with a color-darkening effect to the treated surface.

The coating thickness, combined with the density of Nanolex Si3D matrix, makes the coating highly resistant to abrasion and chemical attack caused by frequent washing.

The high-performance polymers in Si3D are all free of aromatic solvents and fluorine.

To achieve the desired results only one layer of Si3D is required.

Special Discounts for Detailers!

  • Check Mark Satisfaction Guaranteed
  • Check Mark 100% Genuine Products
  • Check Mark Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card

Based on sophisticated organic Polysilazane technology Nanolex Si3D forms a cross-linked three-dimensional matrix to give superb hydrophibicity and increased hardness paired with outstanding durability and a much easier to clean surface.

Nanolex Si3D will add a several micron thick clear coat with a color-darkening effect to the treated surface.

The coating thickness, combined with the density of Nanolex Si3D matrix, makes the coating highly resistant to abrasion and chemical attack caused by frequent washing.

The high-performance polymers in Si3D are all free of aromatic solvents and fluorine.

To achieve the desired results only one layer of Si3D is required.

Nanolex Si3D was developed, tested and manufactured in Germany.

superb hydrophobicity easy to clean surface increased hardness outstanding durability

Features & Benefits:

  • Easy to apply
  • Solvent and fluorine free
  • High resistance to abrasion and weathering
  • Produces a high gloss finish
  • Enhances the paints clarity and colour
  • Durability of approximately 20,000 miles
  • Nanolex Si3D was developed, tested and manufactured in Germany

How to use

Processing temperature: 5-30°C – Avoid direct sunlight and/or high air humidity.

  1. Nanolex Si3D can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
  2. If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off – only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.
  3. Spread 5-10 drops/m2 of Nanolex Si3D on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.
  4. Let Nanolex Si3D cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact. Do not wash the car within the first 72 hours.

Curing time depending on temperature: @50°C: 3-4 hours @80°C: 2 hours

How To Use Nanolex Si3D Sealant Guide

1 review for Nanolex Si3D Ceramic Coating

5.00 out of 5 stars

5
1
4
0
3
0
2
0
1
0
  1. Reviewer profile image
    5 out of 5

    franky281092 (verified owner)

Only logged in customers who have purchased this product may write a review.

You may also like…

  • Suede ceramic coating applicator cloth
     538 4,112
  • Gyeon CancoatPro