Scholl Concepts S3 Gold High Performance Compound

 4,056

Scholl Concepts S3 Gold Edition is a high-performance compound that provides the type of mirror finish that is normally accomplished with a polish. Thanks to an advanced blend of abrasives deemed iPT (Intelligent Powder Technology) Scholl Concepts S3 Gold Edition quickly and effortlessly removes paint defects without scouring or hazing the finish.

2 in stock

Secure Payment Link - Car Detailing Products

Scholl Concepts S3 Gold Edition is a high-performance compound that provides the type of mirror finish that is normally accomplished with a polish. Thanks to an advanced blend of abrasives deemed iPT (Intelligent Powder Technology) Scholl Concepts S3 Gold Edition quickly and effortlessly removes paint defects without scouring or hazing the finish. Like all other products that bear the Scholl Concepts name, S3 Gold Edition is a pleasure to work with.

Scholl Concepts S3 Gold Edition is capable of removing 1500 grit sanding marks, heavy swirl marks, light scratches, acid rain, water spots, and clay-induced marring.

SCHOLL Concepts S3 Gold uses intelligent Powder Technology (iPT) abrasives that break down quickly in use to form a progressively finer polishing residue. As a result, the level of cut on offer diminishes quickly from that of a cutting compound to that of a finishing polish, meaning that it’s possible to correct and refine the finish in a single step. To ease this process, SCHOLL Concepts S3 Gold features advanced lubricants that maximise its efficiency, while its filler-free formula ensures that defect removal is permanent rather than temporary.

 

HOW TO USE

 

SCHOLL Concepts S3 Gold works best by machine. For best results using a dual action polisher, work it with a SCHOLL Concepts 145 mm Cutting Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18″x 18″area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145 mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a GreenZ All-Purpose Towel.

For best results using a rotary polisher, you should work SCHOLL Concepts S3 Gold using either a SCHOLL Concepts 135 mm SOFTouch Wool Pad or a SCHOLL Concepts 145 mm Cutting Pad. Once the pad is well primed, only 1-2 pea-sized drops of product are required per 18″x 18″ area. You should work it thoroughly at 1200-1800 revolutions per minute (speed 3-4 on most rotary polishers), applying moderate pressure for the first 45 seconds or so, and then progressively lighter pressure for a further 45 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145 mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a GreenZ All-Purpose Towel.


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Shipping

You may also like…

  •  460 1,038
  •  2,596
  •  2,604