BLACKFIRE Wet Diamond All Finish Paint Protection Sealant
BLACKFIRE Wet Diamond All Finish Paint Protection is a premium paint sealant designed for DIY and professionals alike. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers, these polymers have a protective quality and depth of gloss.
BLACKFIRE Wet Diamond All Finish Paint Protection is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. Because each of the Wet Diamond polymers reflect and refract light differently, you are left with a look that is unique and without compromise.
But the unique dripping wet look of Wet Diamond All Finish Paint Protection is only the beginning of the story. The Wet Diamond polymers form a tight matrix of protection on the surface of your vehicle. This sealant is great in look, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Wet Diamond All Finish Paint Protection is further boosted with Polycharger for maximum shine, slickness, and longevity.
BLACKFIRE Wet Diamond All Finish Paint Protection can be applied by hand or dual action polisher. It applies easily and buffs off uniformly even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go. Nearly effortless.
Wet Diamond‰۪s incredible shine is resistant to detergent washings and ultraviolet radiation. This keeps your car‰۪s finish protected month after month and wash after wash.
- Creates a deep gloss that shimmers like water.
- Colors radiate with depth and clarity.
- Highly resistant to UV and infrared radiation.
- Safe for all painted finishes.
For best results clay the paint first with Gyeon Q2M Clay and polish with GreenZ Cut & Gloss Compound CG 900 Single-step Polish.
Hand Application: Always use on a cool surface out of direct sunlight. Apply a quarter size amount of product on a dry applicator pad and wipe on the surface using small, circular motions. Allow Wet Diamond All Finish Paint Protection to dry before buffing. Buff haze with a clean GreenZ Gold All-purpose Towel.
Machine Application: Apply BLACKFIRE Wet Diamond All Finish Paint Protection using a finishing pad or wax pad on an orbital polisher, such as the FLEX XC 3401 VRG Orbital Polisher. Work on a small area, about 24 to 24 inches square, out of direct sunlight. Apply two 6 to 8-inch lines of All Finish Paint Protection directly onto the surface. With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant. Place the pad on the paint and turn the machine on. Set the speed dial on the polisher between 3 and 4. Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.). Allow a haze to form. Hand buff to a brilliant shine with a GreenZ Gold All-purpose Microfiber Towel.