Collinite Liquid Insulator Wax 845 (1 Case=12 bottles)
Collinite Liquid Insulator Wax 845 is the best value for money way to protect your vehicle's paint surface and to get an amazing glow. The most popular product in India and across the world, whichåÊnever changed it's formula in last 25 years!
Collinite Liquid Insulator Wax 845 is one of the finest liquid carnauba based waxes you can buy. It has the shine and wetness of carnauba but its longevity is more like a paint sealant. It can provide up to 6 months of protection and incredible water-beading, even on non-garaged vehicles.
This heavy-duty liquid wax was originally developed for use by electric power companies for protection against high-voltage power failure, fires and explosions. Its primary use is on the finishes of automobiles, trucks, buses and airplanes where durability, high gloss and lasting protection are paramount. An excellent choice for fleet applications and very easy to use. Requires minimum rubbing or buffing. Clear-coat safe.
Liquid Insulator Wax can be applied by hand or using a dual action polisher equipped with a finishing pad. If applying by hand, simply wipe on Liquid Insulator Wax using a poly foam applicator. It takes very little to cover each panel. Buff with a GreenZ All-purpose Microfiber Towel. This towel has excellent grip for removing waxes, and it will make application of Insulator Wax even quicker. You will find the wax easiest to remove if you apply a thin coat and do not let it completely haze over before buffing.
To apply by machine: work at a low speed with no pressure since you are simply applying a product. Use a microfiber bonnet over a lambswool pad to remove Insulator Wax. Apply wax to one section at a time, wait 30 seconds, and then buff.
The wax is only available in a heavy-duty 16oz bottle that features a safety cap and not having any seal.
The Collinite 845 comes in a thick consistency and in order to get Collinite 845 Liquid Insulator Wax to the thin consistency necessary for the proper application, you may need to melt it by either keeping in the sun or immersing in a hot water bucket (never boil it). Shake the bottle to ensure proper mixture and an even consistency of the product which helps an easy application of the product.
You can pour the melted Collinite 845 in a dispenser bottle for an easy application. The Collinite 845 Liquid Insulator wax goes on thin, thin, thin! It doesn't take a lot of product and the more you apply, the more difficult it is going to be to wipe off. The amount you see below was enough wax to completely cover the entire quarter panel on a medium-sized car, It takes very little to cover each panel. If you're going to apply the wax by hand, use a foam wax applicator works best.
If you are using a machine, use Lake Country CCS Red Pad or Lake Country Hydro-Tech Crimson pad and use few drops on the pad. Use low speed while applying by machine. After waxing the entire car, let it dry to a haze for about 40-50 minutes. As the temperature and humidity vary from location to location, you can simply practice the swipe test. If you're not familiar with the swipe test, it's when you swipe your finger across the panel to reveal either shiny paint or a streaky finish. If the wax streaks where you swiped your finger, the wax has not dried completely yet. When the wax swipes clean, meaning the area of wax removed with your finger is clean and shiny, the wax has fully dried to a haze and is ready to be removed with a soft microfiber towel.
Use a microfiber towel (like GreenZ Gold All Purpose towel) with a medium nap to remove the wax. This towel has excellent grip for removing waxes, and it will make application of Insulator Wax even quicker. You will find the wax easiest to remove if you apply a thin coat and do not let it completely haze over before buffing.
If using a machine, use a microfiber bonnet over a lambswool pad to remove Insulator Wax. Apply wax to one section at a time
Collinite Liquid Insulator Wax 845 with FREE GREENZ BLUE CLEANING TOWEL
Size: 16 oz.