Gyeon Q2 Leather Coat
Gyeon Q² LeatherCoat is an advanced leather coating based on SiO2. This provides highly durable protection against stains, dirt, water, UV rays etc.
Q² Leather Coat is the first proper coating for all your leather trim. It's not a standard dressing, which typically only helps to refresh the leather, but it is a strong protectant. It builds a layer on the upper side of the leather bonding strongly to the surface. At the same time it doesn't affect the look and feel of soft leather trim.
Only one layer of Q² Leather Coat ensures high level of protection as the coating itself is hydrophobic and repels both liquids and dirt. It also provides strong protection against UV rays, allowing to keep for a long time the freshness of colors even in hot and sunny climates.
As most of modern interior leather trims have a factory matte finish, we made sure that Q²M Leather leaves such effect and at the same time gives enormous color saturation.
Q² Leather is designed to protect leather trim for a maximal possible time by preventing it from dirt, sweat, salt and fats. Its hydrophobic properties and strong bonding to the surface help to protect against pollutants that may penetrate structure of your trim. Q² Leather gives also protection against any discoloration resulting upon contact with leather belts, jackets or jeans trousers.
EASY TO USE AND DURABLE
Q² Leather is very easy to use. Proper surface preparation is crucial to ensure good bonding therefore HQ leather cleaner should be used prior to sealing. We recommend using cleaners which do not contain any natural moisturizing additives, as they could weaken the bonding process. In case it's needed, you can gently wipe the surface with Q2M Prep applied onto a microfiber. The coating process itself requires usage of microfiber applicator or cloth to apply an even layer, which afterwards needs to be left for at least few hours to dry and bond with the trim.
|DURABILITY: > 3 months
BARRIER AGAINST LIQUIDS: yes
SURFACE: every leather
PH NEUTRAL: yes
ADVICE ON APPLICATION
Cleanse leather with a HQ leather cleaner. Never apply without appropriate preparation of the surface. Let it dry and bond for at least 1 hour.