Gyeon Q2M Cure
Gyeon Q2M Cure is an excellent easy to use hydrophobic spray sealant and also a maintenance product for the quartz coatings. Gyeon Q2M Cure can be applied to wet or dry surfaces equally well, and the incremental addition of these SiO2-fortified polymers over time not only makes routine washing and drying even easier but also prolongs the life of the underlying quartz coating almost indefinitely.
Gyeon Q2M Cure enhances gloss, adds hydrophobicity and imparts strong anti-static properties. It also reduces the mineral affinity of freshly applied quartz coatings and thus eliminates the risk of water spots forming and etching into treated surfaces.
Improves Durability of the Base Coating
The primary job of Q2M Cure is the maximum prolonging of the base quartz coating durability, e.g. Q2 Prime or Q2 Mohs. Through a regular maintenance, you may gain an extension of an excellent hydrophobic effect up to the 90% durability of the base coating.
Efficiency is the one of the key features of all Gyeon products while Q2M Cure seems most illustrative of that. One or two sprays should be sufficient to cover with a protective coating an entire panel as big as a door. Low consumption translates into a great value for the quality of our quartz-based detailer.
Two Application Modes (Wet & Dry Paint)
In order to make work faster and more effective, the application of Q2M Cure both on a dry and on a wet car (after finishing up the washing) is possible. Laying out over a wet surface facilitates drying with a waffle towel - the paint immediately becomes slippery and displays anti-static features.
Prevents Water-spots And Stains
Throughout the first couple of weeks following the application, the quartz coatings exhibit some insignificant tendency towards the risk of hard water stains deposition. The use of Q2M Cure immediately after base coating application will help eliminate that risk entirely.
The product is also amazing as a Quick Detailer, which removes all potential streaks and residual water. It gives the paint a vivid shine, restoring the "just after coating" appearance.
Use as a Spray Sealant for Uncoated Paints
Q2M Cure is also a brilliant solution for those users who wish to achieve effects without having to invest lots of time and effort. It will work as a spray sealant even on vehicles with no coating. As opposed to other products available on the market, it accommodates within its chemical constitution a significant share of SiO2, hence, can warrant top-notch water repellence and top visual effect from the first use.
|DURABILITY: >6 weeks
SIO2 PERCENTAGE: >5%
CONTACT ANGLE: >80'
PH TOLERANCE: pH 4-9
ADVICE ON APPLICATION
Before you start applying, wash the car with a shampoo (Q2M Bathe is recommended). The product can be used on a dry and wet vehicle.
Keep out of reach of children. Seek medical attention if swallowed.