Gyeon Q2M Tar
GYEON Q2M TAR is another must have the arsenal with the detailers in India to fight against tar spotting. This goes along with other products like Q2M IRON and Q2M Clay to routine coating-safe decontamination.
SPEEDS UP THE DETAILING PROCESS
Vehicles usually collect large amounts of tar and asphalt contamination during everyday use. The stronger horsepower and the more aggressively used, the bigger an issue gets. Q2M Tar gives a great opportunity to speed things up as usually an overall decontamination process, which includes claying, takes a lot of time. Most contamination is simply dissolved, which allows obtaining a smooth finish in nearly no time.
PREVENTS FROM CLAY-MARRING
On soft or medium hard paints even the use of a mild clay may result in marring. As most contamination can be dissolved be combined usage of Q2M Tar and Q2M Iron, this product is also a great help in the maintenance of cars, which have had paint correction done in the past. It allows removing pollution, without leaving marring or scratches, that otherwise would have to be removed by polishing. It does not affect the coating and is hydrophobic and durable.
ALL SURFACE SAFE & NEUTRAL
Unlike most tar removers, Q2M Tar does not affect any exterior surfaces and is bodywork safe. It can be used on paint, glass, plastic trim, both painted and unpainted. As it is pH neutral, it can be used to remove tar spots also from bare polished lips.
REMOVES TAR AND SAP FROM HARD ACCESSIBLE PLACES
Q2M Tar does not only remove tar or asphalt, but also organic contamination like sap or environmental pollution. It also helps in dissolving resins.
WORKS WITH Q2M CLAY
Q2M Tar might also be used with our chemical resistant Q2M Clay, in the same manner as Q2M Iron. Due to its slickness, it provides sufficient lubrication when claying, which in the whole, shortens entire preparation process of heavy contaminated vehicles before any paint correction.
|BODYWORK SAFE: yes
PH NEUTRAL: yes
ADVICE ON APPLICATION
Wash the whole bodywork with an HQ car shampoo, rinse well and spray generously with Q2M Tar. Wait for approx. 2-4 minutes and either wash away or wipe with a damp MF cloth until the surface remains perfectly smooth.