Menzerna Heavy Cut Compound 400
Menzerna Heavy Cut Compound 400 is the very latest heavy duty polishing compound capable of removing serious paint defects even on the toughest of clear-coat finishes.
The particles in the formula fracture under heat and pressure so you need less of the product and you less likely to burn the paint because you will use a lower speed. The particles start off by acting like a compound and then as they break down their properties change to act more as a polish. Menzerna polish are famous for producing uniform shaped particles in their polishes and it's this that reduces hazing. It is so effective at not inducing hazing that it possible to go directly form compounding to a finishing product.
Menzerna Heavy Cut Compound 400 contains twice as much milled Aluminium Oxide as found in Intensive polish so is capable of removing twice the defects. Where Intensive Polish is designed for swirls and moderate scratches, Fast Gloss is more hardcore so better for deeper scratches, 1000 to 1500 grit defects and water spots or for use on tough OEM paints.Like the rest of the range it is silicone and filler free so results are permanent.
In light coloured paints you will require only a little if any polishing afterwards, the darker black and red paints may require a further polish just to restore the gloss.
- Safe water based formula that has no fillers or silicones.
- Professional polish with a legion of fans.
- Suitable for deeper scratches and water spots.
I have tried Meguiars M105, M100 and Ultimate compound and then this. So far this the best I have seen. Uses DAT and finishes well, LSP ready