Menzerna Super Finish Plus 3800
Menzerna Super Finish Plus (3800) is an ultra fine finishing polish designed to leave paint with the highest levels of gloss possible for a show car finish.. Super Finish Plus contains a micro-fine abrasive dust that quickly removes light imperfections and holograms while creating a mirror shine. This new formula features less dusting than the original Nano Polish and leaves your vehicle with the glossiest possible finish.
Menzerna has hit another milestone with Menzerna Super Finish Plus. This polish creates unmatched gloss and slickness that is quickly becoming the standard for finishing polishes. The abrasive powder is equally effective on ceramic and conventional clear coats. Menzerna Super Finish Plus levels light imperfections and holograms while polishing the paint to an unbelievable shine.
Menzerna Super Finish Plus is made with a very finely ground abrasive powder that leaves no marring or surface haze. Though designed for fresh OEM coatings, Menzerna Super Finish Plus can be used as a gloss-enhancing polish or finishing polish on older paint finishes. It will eliminate compounding marks and prepare the paint for wax or sealant. (We highly recommend Wolfgang Deep Gloss Paint Sealant 3.0. The water-based formula is compatible with the Menzerna line and leaves the paint with a gorgeous gloss.)
Menzerna Super Finish Plus is body and paint shop safe. It contains no waxes, glazes, or silicones.
Apply Menzerna Super Finish Plus with a dual action or rotary (circular) polisher for the best cutting power. For gloss enhancement, Menzerna Super Finish Plus can be applied by hand.
Application by hand:
1.Mist the Wolfgang German Polish N Wax Applicator with XMT Pad Conditioner to moisten the foam. Apply a nickel size amount of Menzerna Super Finish to the applicator.
2.Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Cobra Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
Note: Applying Menzerna Super Finish by hand will enhance gloss but it will not remove swirls. For paint correction, you must apply this product with a polisher.
Application by Machine:
1.Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Super Finish out of direct sunlight.
2.Use a soft foam finishing pad, like Lake Country CCS Gray Finishing Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
3.Polish at 1200-1800 RPM (5-6 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
4.Wipe the area with a damp microfiber cloth.
5.Always apply a wax or sealant after polishing.